Home > Aviation Obstruction Light > Low Intensity Obstruction Light

CAAC Approved Low-intensity Type A Aviation Obstruction Light

CAAC Approved Low-intensity Type A Aviation Obstruction Light

Item No.: TX-LA-01（L）

1. Casting aviation aluminum base, fully sealed structure.
2. High brightness SMT LED chip,reflecting optical structure.
3. Management circuit with Strong lightning protection.
4. With the surge protection device.
5. Conform to MH/T6012-2015 standard

INQUIRY

Description

Specification

Standard	CAAC	MH6012-2015	Aviation obstruction light
	ICAO	ICAO Annex 14Volume I 6th Edition	Airport design and operation
FAA classify	L-810	Vertical Divergence	＞10°
Model	TX-LA-01（L）	Horizontal Out-put	360°
Power supply	Optional ：AC220V, DC180V	Overall Size	132126125mm
Power frequency	50HZ～60HZ	Installation size	G3/4 cylindrical pipe thread
Power	≤2W	Ambient Temperature	-40℃～55℃
Working mode	Steady light	Weight	1.1kg(Not include bracket )
Light intensity	＞10cd	Photocell ambient brightness	50/100Lux
Light source	LED	Anti Wind Ability	240km/h
Light source life	≥20 years	Protection grade	IP65
Emitted color	Red

Features

Housing adopt high intensity casting aviation aluminum, fully sealed structure.
Adopt high efficient SMT LED chip, which have the specific of high brightness, low power consumption and long long lifespan.
Adopt with independent research and development advanced optical lighting system，Spotlight angle meets CAAC and ICAO requirements.
With surge protection device, which can adopt to extremely bad working environment.
Adopt advanced high high thermal conductive stoving varnish technology, which provide excellent heat dissipation, it can shortage lamp’s weight and volume efficiently
With the impact resistance, anti lightning, resistant to sunlight, anti snow, can resist typhoons, hail and other severe weather.
With over-current protection function.
It can be customized functions of GPS Beidou wireless synchronization, LORA-10KM wireless sync, Remote control and telemetering.

Attention / Usage Tips

Don't use any out of nominal voltage,or will destroy equipment.
Do not open it if the device is out of operation, in order not to be hurt by the internal high pressure.
After finished the installation, the personnel must check whether the device is in a good waterproof processing and whether the screw spikes are tightened.
Non-professional workers can not do the device maintenance, in order not to expand the error and be hurt.

Application
Block, Airport, high-pole lamp, Chimney, Bridge, Towers, Communication tower, super high building.

CAAC Approved Low-intensity Type A Aviation Obstruction Light

Review