Categories

High Intensity Type A Aircraft Obstruction Light

Item No.: GS-MI/G
1. High intensity aviation aluminum casting chassis, IP68;
2. Low power consumption and long life LED chip ;
3. PC material Lampshade,resist corrosion,anti UV,anti shock ;
4. Lightning and surge protection;
5. Photoswitch,lighting on/off automatic.
Description
Specification 

FAA  Standard:

L-867

Type:

GS-MI/G

Power voltage:

AC 110V/220V,DC 12V/24/48V

Power Supply Frequency:

50HZ~60HZ

Average power consumption:

60W

Flash rate:

Flashing 40 times/min

Continuous working time: 

200ms 

Light intensity:

2000cd±25%~200000cd±25%

Horizontal Out-put:

360°

Vertical Divergence:

≥3°

Service Life of the Light Source:

≥20years

Emitting Color:

White

Overall Size:

255mm×255mm×210mm

Installation Size:

¢234mm×M8

IP Protection:

IP68

Optically Controlled Ambient Brightness:

50/100Lux

Ambient Temperature: 

-40℃~70℃

Net Weight:

4.8kg

Anti-Wind Ability:

80m/s


Features 
1.Full sealed structure base, casting by high intensity aviation aluminum alloy.
2.Special LED chips, with brightness, low power consumption and long life.
3.PC material cover, provides strong corrosion resistance, UV resistance, impact resistance.
4.Its lightning protection ability and control circuit with anti surge protective device that can apply to poor working environment.
5.A variety of work modes can be customized according to customer’s requirements.
6.Built-in photocell can switch ON/OFF the light at dawn or at dusk (optional).

Attention / Usage Tips 
1.Check whether the supply voltage does comply with the rated voltage of device.
2.Do not open it if the device is out of operation, in order not to be hurt by the internal high pressure.
3.Afterfinished the installation, the personnel must check whether the device is in a good waterproof processing and whether the screw spikes are tightened.
4.Non-professional workers cannot do the device maintenance, in order not to expand the error and be hurt.
5.Check whether the supply voltage does comply with the rated voltage of device.
6.Do not open it if the device is out of operation, in order not to be hurt by the internal high pressure.
7.Afterfinished the installation, the personnel must check whether the device is in a good waterproof processing and whether the screw spikes are tightened.
8.Non-professional workers cannot do the device maintenance, in order not to expand the error and be hurt.

Application 
Block
Airport
High Mast lamp
Chimney
Telecom towers
Bridge
High-rise Buildings


Dimension drawing 

Review

Shenzhen Green Source Light Equipment Co., Ltd © All Rights Reserved.