Home > Aviation Obstruction Light > High Intensity Obstruction Light

CAAC Approved High-intensity Type A Aviation Obstacle Light

CAAC Approved High-intensity Type A Aviation Obstacle Light

Item No.: TX-HA-01（L）

1. Casting aviation aluminum shell, fully sealed structure.
2. High brightness SMT LED chip,combine double layers overlay reflective optical structure.
3. Management circuit with Strong lightning protection.
4. Conform to MH/T6012-2015 standard.

INQUIRY

Description

Specification

Standard	CAAC	MH6012-2015	Aviation obstruction light
	ICAO	ICAO Annex 14Volume I 6th Edition	Airport design and operation
FAA classify	L-856	Vertical Divergence	＞3°
Model	TX-HA-01（L）	Horizontal Out-put	90°
Power supply	Optional ：AC220V, DC180V	Overall Size	570190266mm
Power frequency	50HZ～60HZ	Installation size	55090M10
Power	≤30W	Ambient Temperature	-40℃～55℃
Working mode	Flash 40times/min	Weight	11.6kg(Not include bracket )
Light intensity	2000～20000cd	Photocell ambient brightness	50/100Lux
Light source	LED	Anti Wind Ability	240km/h
Light source life	≥20 years	Protection grade	IP65
Emitted color	white

Features

Housing adopt high intensity casting aviation aluminum, fully sealed structure.
Adopt high efficient SMT LED chip, which have the specific of high brightness, low power consumption and long long lifespan.
Adopt with independent research and development advanced optical lighting system，Spotlight angle meets CAAC and ICAO requirements.
With surge protection device, which can adopt to extremely bad working environment.
Adopt advanced high high thermal conductive stoving varnish technology, which provide excellent heat dissipation, it can shortage lamp’s weight and volume efficiently
With the impact resistance, anti lightning, resistant to sunlight, anti snow, can resist typhoons, hail and other severe weather.
With over-current protection function.
It can be customized functions of GPS Beidou wireless synchronization, LORA-10KM wireless sync, Remote control and telemetering.

Attention / Usage Tips

Don't use any out of nominal voltage,or will destroy equipment.
Do not open it if the device is out of operation, in order not to be hurt by the internal high pressure.
After finished the installation, the personnel must check whether the device is in a good waterproof processing and whether the screw spikes are tightened.
Non-professional workers can not do the device maintenance, in order not to expand the error and be hurt.

Application
Block, Airport, high-pole lamp, Chimney, Bridge, Towers, Communication tower, super high building.

CAAC Approved High-intensity Type A Aviation Obstacle Light

Review